v Cutting: This is the easiest method of stripping a wire by simply cutting way the insulation.
v Abrasive: This method involves the use of a rough wheel to strip off the wire and the cleans the wire by polishing it
v Thermal: This method uses heat to burn off the wire’s insulation
v Mechanical: This involves the use of the combination of a mechanical power source and either the cutting or abrasive method
v Chemical: This stripping method involves the use of chemicals that react with the insulation. The chemical usually causes the insulation to melt away.
v Laser Method: This is an advanced tech method often employed for specific purposes. Using this method, the laser takes out the insulation without any interference with the conducting metal inside.
How are these manual and automatic wire strippers used to cut the wires and cables?
Manual Strippers
A typical portable wire stripper is made up of a wire cutter that has the shape of a scissors. The wire cutter part of the tool has two blades faced against each other with a different sized notches arranged sequentially. To use a wire stripper, you place the wire to be stripped in the notch which fits with the wire diameter and then cut to the wire via the insulating material. You can then use your hand to strip off the insulation as the wire doesn’t stick to the insulating material. One peculiar advantage of using the manual stripper is that, aside used as a cutting tool, it can also be used for bending the wire.
Automatic Stripping Machine
The performance of an automatic stripping machine is done in a single motion, the stripping machine both holds, cut and strip the wire simultaneously. The automatic wire stripping machine is mostly used when there is demand for huge units of wire rather than when different diameters of required, as the automatic stripping machine functionality is reduced when wires of varying lengths is required to be stripped.
Other types of wire stripping machine listed above also have distinct ways in which they are used to strip wires or cables. They include;
v Abrasive Wire Stripping Machine:
The way to use this type of stripping machine is quite straightforward. You simply place the wire or cable to be cut at the centre of two abrasive wheels which are conventionally made of fibreglass or wire. It is important to note that the abrasive wheel must be manufactured with the appropriate material and specific texture that will be able to cut through the wire and strip it, as using the wrong material for the abrasive wheel can cause damage to the wire metal. You should also ensure that you apply the suitable force in order not to break the conducting material.
v Chemical Wire Stripping:
The way to use chemicals to strip wires entails applying a chemical stripper to the insulating material. After that, then you also add a neutraliser and then alcohol. The combination of these fluids causes the wire strip to be removed by ‘melting’ away from the conducting metal. You then proceed to rinse and clean off the chemical from the metal. To use the method for stripping wire, you need to endeavour to work under supervision and strict environmental regulations as the chemicals are toxic. This method is employed when minimal damage to the metal is expected.
v Thermal Wire Stripping:
The use of this type wire stripping machine involves the use of flames to take off the insulation. The way to use the machine is by heating up the insulation using the hottest upper tip of the flame. Hot blade strippers are also used as another method of thermal wire stripping. You can adjust the gauge of the flame depending on the diameter of the wire and also the type of insulting material. This method of wire stripping is majorly employed for wires such as coaxial wire, single strand wire and shielded wire, with insulation which includes Teflon, neoprene, and Vinyl.
v Laser Wire Stripping:
This method is the most expensive way of stripping a wire. The procedure of using this type of wire stripping machine involves using the laser to melt away the insulating material. This is to be done with extreme caution and accuracy so as not to burn the conducting metal. It is the recommended wire stripping machine to be used when fine gauge wires are to be worked on.
How to find the suitable wire stripping machine?
There are several types of wire stripping machine, both manual and automatic, on the market today. And it is often tedious and confusing to select the appropriate and perfect type that will suit your demand. At Cheers electronics Company, we give a thorough insight on the right tool or machine to purchase. We deliver to clients both within the United States and also internationally.
For every manufacturer who needs to purchase any type of wire stripping machine such as those listed above or other types like wire crimping machine, copper wire automatic stripping machine, eraser wire stripping machine, etc., you can contact us, Cheers Electronics Company to make your orders. You can also visit our online shopping platform on www.terminal-crimping.com , to see series of stripping machines with their distinct specifications and applications. We also boast of efficient and exceptional management team who are always available to offer their services and assistance to you whenever you need to make a purchase. They also utilise quality time to give in details the benefits and demerits of using any type of wire stripping machine you wish to purchase on our platform.
